6419 2850 9101 4691 6419 2851

Building Materials - Bostik Range

Bostik Prepacked Mortars Back

BOSTIK XPS

Description

Bostik XPS MY is a synthetic resin modified cement powder with high flow characteristic. It is an overlayment levelling compound for smoothing and levelling of screeds, concrete floors and other hard, rigid bases, up to a maximum thickness of 15mm in a single work step

Uses

Bostik XPS MY is suitable for hard wear in commercial and industrial locations where service is only interrupted for few hours (hypermarkets and stores, hospitals, factories and workshops, public buildings). After only 4 hours, the smoothed surface is ready for laying floor coverings. Suitable for heavy-duty areas / locations with high point loading (with or without wheeled traffic). Suitable for renovating concrete floors damaged by vehicle traffic (e.g. car parks). Can be used to fill depressions and drainage ditches of all depths and all types of substrates. Can be used as wearing surface. For interior and exterior use.
PACKING COLOURS
25KG GREY

BOSTIK ROXOL TRAFFIC 3

Description

Roxol Trafic 3 MY is a synthetic resin modified cement powder with high flow characteristic. It is an underlayment leveling compound used to smoothen surface irreguralities to receive floor covering.

Uses

Roxol Trafic 3 MY levelling compound is suitable for smoothing and levelling of screeds, concrete floors and other hard / rigid bases (ceramic tiling and special plastreboards). Roxol Trafic 3 MY can be used on heavy duty areas and location with high point loading. It can be applied on traces of hard, sound and water-tight adhesives (existing acrylic, neoprene and bituminous film). Suitable under parquet/wood floors, vinyl and textile coverings, linoleum, tiling and existing levelling compounds. Not to be used as a wearing surface. For interior use only.
PACKING COLOURS
25KG GREY

BOSTIK MAXIFLEX

Description

Maxiflex MY is a high strength powdered adhesive for wall and floor applications. Suitable to use over concrete, cement render, screeds, fibrous cement sheeting and Bostik approved waterproof membranes. Maxiflex MY is recommended for all internal and external applications. Maxiflex MY is suitable for all types of tiles. CLASSIFICATION / STANDARDS BS EN12004 CLASSIFICATION C2 Improved Adhesive (excellent bond) T Slip Resistance Adhesive E Extended Open Time Adhesive

Uses

Suitable substrates • Concrete • Cement render • Brickwork • Blockwork • Fibrous cement sheeting • Bostik approved waterproofing membranes
PACKING COLOURS
25KG GREY

BOSTIK FIXALL

Description

Fixall MY is a rigid set cement based adhesive suitable for most types of ceramic wall and floor tiles including monocottura, slate, quarry tiles, terracotta and natural stone. Fixall MY is suitable for thin and thick bed application onto rigid substrates, including concrete, cement render, brickwork and blockwork. CLASSIFICATION / STANDARDS BS EN 12004 CLASSIFICATION C1 Normal Adhesive

Uses

Suitable Substrates • Concrete • Cement render • Brickwork • Blockwork
PACKING COLOURS
25KG GREY
Showing 1 to 4 of 4 entries